Education

PhD: Dept. of Chemical Engineering, Korea Univ., 1999.08.
MS: Dept. of Chemical Engineering, Korea Univ., 1995.02.
BS: Dept. of Chemical Engineering, Korea Univ., 1993.02.

 

Experience

Professor(Assistant/Associate/Full): Dept. of Chemical and Biological Eng., Korea Univ., 2003.03. ~ present
Director, Center for Research Facilities (College of Engineering), 2015.09 ~ 2017.08

Asscoiate Chair: Dept. of Chemical and Biological Eng., Korea Univ., 2011.08. ~ 2013.01
Visiting Prof.: School of Chemical and Biomolecular Eng., Cornell Univ., 2009.07 ~ 2010.08
Supervisor: Korea Univ-Anam Dormitory, 2008.01 ~ 2008.12
Research Professor: Applied Rheology Center, Korea Univ., 2001.11. ~ 2003.02
Postdoctoral Fellow: Dept. of Chemical Eng. & Materials Sci., Univ. of Minnesota, 2000.07. ~ 2001.11.

 

Professional Societies and Service

Editor-in-Chief of Korea-Australia Rheology Journal (SCIE), 2016.02 ~ present
Board member of International Society of Coating Science and Technology (ISCST)
Member of the Society of Rheology (SoR), USA
Member of the Korean Institute of Chemical Engineers (KIChE):

          Editorial board of NICE (2005.01 ~ 2012.12)
          Secretary of Transport Phenomena Committee (2011.01 ~ 2011.12)

Member of the Korean Society of Rheology (KSR):

          Associate Editor: Korea-Australia Rheology Journal (2008.01 ~ 2016.01)
          Secretary (2012.01 ~ 2012.12)     
Member of the Polymer Society of Korea: Editorial board of Polymer (Korea) (2011.01 ~ present)
Korean Union of Chemical Science and Technology Societies (Editorial board, 2013.01~2016.12)

 

Research Interests

Dynamics and stability of coating processes (curtain, slide, slot, and roll coatings)
Flow dynamic and drying of particulate suspension systems
Chemorheology and curing characteristics of organic coatings (UV and thermal dual curing)
Nonlinear dynamics, stability, and sensitivity of rheological processes
Extensional rheology
Micro-rheology using diffusing wave spectroscopy (DWS), Multi-speckle DWS, and DLS

Micro-flows

 

Awards

KU President's Award (1993, bestowed on only the top graduate in the College of Engineering)
Bumseok Paper Award, Korean Instistute of Chemical Engineers (2005)
Young Rheologist Paper Award, Korean Society of Rheology (2011)

SeokTop Lecture Award (2008.05.05, 2008.09.01, 2012.05.05, 2015.05.05, 2016.10.26)
Excellent Lecture Award (2011.05.05, 2011.09.01, 2014.05.09, 2014.09.01, 2016.04.04, 2017.04.13, 2017.10.27, 2018.04.13)
Best Paper Award, Korean Federation of Science and Technology Societies (2015)

Book Chapters: 

(**) 정현욱, 이주성, 현재천, “제 6 장 신장 흐름계의 유변학,” 유변학의 이론과 응용 (단행본), 한국유변학회 (2001).

(**) H.W. Jung, J.C. Hyun, “Chapter 11: Fiber Spinning and Film Blowing Instabilities,” in Polymer Processing Instabilities: Control and Understanding, Marcel Dekker, Inc., New York (2005).

(**) H.W. Jung, J.C. Hyun, “Instabilities in extensional deformation polymer processing,” Rheology Review 2006 (2006).

 

SCI(E) Papers

(2018)

(**) B. Chun, J.S. Park, Y.-Y. Won, H.W. Jung, "Shear-induced particle migration and segregation in non-Brownian bidisperse suspensions under planar Poiseuille flow," Submitted (2018).

(**) K.I. Jung*, S.O. Hwang*, N.H. Kim, D.G. Lee, J.-H. Lee, H.W. Jung, "Effect of methacryloxypropyl and phenyl functional groups on crosslinking and rheological and mechanical properties of ladder-like polysilsesquioxane hard coatings," Prog. Org. Coat., 124, 129-136 (2018).

(**) W. Choi*, C. Lee*, Y.J. Won*, D. Lee, G.W. Lee, M.G. Shin, T.-S. Kim, H.-D. Park, B. Chun, H.W. Jung, J.S. Lee, J.-H. Lee, "Sharkskin-mimetic water desalination membranes with ultralow biofouling," J. Mater. Chem. A, Accepted (2018). 

(**) N.H. Kim, S. Yoon, K.I. Jung, D.G. Lee, J. Bang, H.W. Jung, “Crosslinking behaviors and mechanical properties of curable PDMS and PEG films with various contents of glycidyl methacrylate,” J. Appl. Polym. Sci., In print (2018).

(**) K.I. Jung, B. Kim, D.G. Lee, T-H Lee, S.Y. Choi, J.C. Kim, S.M. Noh, Y.I. Park, H.W. Jung, “Characteristics of dual-curable blocked isocyanate with thermal radical initiator for low-temperature curing of automotive coatings,” Prog. Org. Coat., 125, 160-166 (2018). 

(**) W.-G. Ahn*, S.H. Lee*, J. Nam, B. Chun, H.W. Jung, “Simultaneous analysis of die internal and external flows in slot coating process," J. Chem. Eng. Japan, Accepted (2018).

(**) J. Hwang, D.G. Lee, H. Yeo, J. Rao, Z. Zhu, J. Shin, K. Jeong, S. Kim, H.W. Jung, A. Khan, “Proton transfer hydrogels: Versatility and applications,” J. Am. Chem. Soc., 140, 6700-6709 (2018).

(**) W.-G. Ahn, S. H. Lee, J. Nam, S.J. Kim, K.-Y. Lee, H.W. Jung, “Effect of upstream meniscus shape on dynamic wetting and operability limits of Newtonian coating liquids in slot coating bead flows,” J. Coat. Technol. Res., 15, 1067-1076 (2018).

(**) B.S. Park, W.-G. Ahn, K.I. Jung, S.J. Lee, K.-Y. Lee, H.W. Jung, “Analysis of the drying behavior of suspension drops with spherical and ellipsoidal particles," Drying Technology, 36, 2022-2029 (2018).

(**) S.H. Yoon*, D.G. Lee*, N.H. Kim, K.I. Jung, C.S. Lee, J.W. Lee, G.S. Lee, H.W. Jung, "Relationship between curing characteristics and rheological/mechanical properties of soft-feel coatings for automotive plastic parts," Polym.-Korea, 42, 303-310 (2018).

(**) S.O. Hwang, A.S. Lee, S.-H. Park, J.-Y. Lee, I. Jung, H.W. Jung, J.-H. Lee, “Mechanical properties of ladder-like polysilsesquioxane-based hard coating films containing different organic functional groups,” Prog. Org. Coat., 121, 105-111 (2018).

(**) B.S. Park, K.I. Jung, S.J. Lee, K.-Y. Lee, H.W. Jung, “Effect of particle shape on drying dynamics in suspension drops using multi-speckle diffusing wave spectroscopy,” Colloid Polym. Sci., 296, 971-979 (2018).

(**) I. Kwon, M.-S. Chun, B. Chun, H.W. Jung, J.C. Hyun, "Particle migration in planar Couette-Poiseuille flows of concentrated suspensions," J. Rheology, 62, 419-435 (2018).

(**) B.S. Park, K.H. Hyung, G.J. Oh, H.W. Jung, “Transitional analysis of organic thin color filter layers in displays during baking process using multi-speckle diffusing wave spectroscopy," Korea-Australia Rheol. J. (Invited paper for ISAR-2017), Korea-Australia. Rheol. J., 30(1), 11-19  (2018).

(**) D.Y. Lee, G.W. Lee, K. Yoon, B. Chun, H.W. Jung, "Lattice Boltzmann simulations for wall-flow dynamics in porous ceramic diesel particulate filters," Appl. Surf. Sci., 429, 72-80 (2018).

 

(2016-2017)

(**) B.S. Park, K.H. Hyung, G.J. Oh, H.W. Jung, "Dynamic change of color filter layer in baking process by multi-speckle diffusing wave spectroscopy," Chem. Eng. & Technol., 40, 2230-2237 (2017). 

(**) K. Yoon, H.W. Jung, M.-S. Chun, "Secondary flow behavior of electrolytic non-Newtonian fluids with Bird-Carreau model in curved microchannels," Rheol. Acta, 56, 915-926 (2017).

(**) B. Chun*, I. Kwon*, H.W. Jung, J.C. Hyun, "Lattice Boltzmann simulation of shear-induced particle migration in plane Couette-Poiseuille flow: Local ordering of suspension," Phys. Fluids (Special Issue of INNFM-2017) (2017), 29, 121605 (2017).

(**) J.S. Lee, I. Kwon, H.W. Jung J.C. Hyun, "Helical instability in film blowing process: Analogy to buckling instability," Phys. Fluids (Special Issue of INNFM-2017), 29, 121501 (2017).

(**) Y.W. Lee, W.-G. Ahn, J. Nam, H.W. Jung, J.C. Hyun, "Operability windows in viscoelastic slot coating flows using a simplified viscoelastic-capillary model," Rheol. Acta, 56(9), 707-717 (2017).

(**) Kevin I. Jung, D.G. Lee, K.W. Bong, S.M. Noh, M.S. Um, W.J. Choi, B. Kim, H.W. Jung, "Effect of solvents on the rheological and crosslinking properties of photo-polymerized poly(ethylene glycol) hydrogels," Korean J. Chem. Eng., 34(5), 1517-1523 (2017). 

(**) J.H. Shim, H.J. Moon, H.W. Jung, K. Bong, "Fabrication of NOA microfluidic devices based on sequential replica molding," Korean J. Chem. Eng., 34(5), 1495-1499 (2017).

(**) S.-J. Park*, W.-G. Ahn*, W. Choi, S.-H. Park, J.S. Lee, H.W. Jung, J,-H. Lee, "A facile and scalable fabrication method for thin film composite reverse osmosis membranes: dual-layer slot coating," J. Mater. Chem. A, 5, 6648-6655 (2017).

(**) I. Kwon, B. Chun, M.-S. Chun, H.W. Jung, J.C. Hyun, "Sensitivity analysis of two-dimensional viscoelastic film casting processes using transfer functions by transient frequency response method," Korea-Australia. Rheol. J., 29(1), 67-73 (2017).

(**) I. Kwon, H.W. Jung, J.C. Hyun, "Stability windows for draw resonance instability in two-dimensional Newtonian and viscoelastic film casting processes by transient frequency response method," J. Non-Newtonian Fluid Mech., 240, 34-43 (2017).

(**) D. Kim*, D.G. Lee*, J.C. Kim, C.S. Lim, N.S. Kong, H.W. Jung, S.M. Noh, Y.I. Park, "Effect of molecular weight of polyurethane toughening agent on adhesive strength and rheological characteristics of automotive structural adhesives," Int. J. Adhes. Addhes., 74, 21-27 (2017).

(**) G.J. Oh, J.W. Hwang, S.J. Lee, K.W. Bong, H.W. Jung, "Particle dynamics and relaxation in bimodal polystyrene suspensions during drying using multi-speckle diffusing wave spectroscopy," AIChE J., 63(3), 1114-1121 (2017). 

(**) W. Choi, E.P. Chan, J.-H. Park, W.-G. Ahn, H.W. Jung, S. Hong, J.S. Lee, J.-Y. Han, S. Park, D.-H. Ko, J.-H. Lee,  "Nanoscale pillar-enhanced tribological surfaces as antifouling membranes," ACS Applied Materials & Interfaces, 8(45), 31433-31441 (2016).

(**) D.G. Lee, S.Y. An, M.S. Um, W.J. Choi, S.M. Noh, H.W. Jung, J.K Oh, "Photo-induced thiol-ene crosslinked polymethacrylate networks reinforced with Al2O3 nanoparticles," Polymer, 101, 119-126 (2016).

(**) B. Kim*, D.G. Lee*, D.Y. Kim, H.J. Kim, N.S. Kong, J.C. Kim, S.M. Noh, H.W. Jung, Y.I. Park, "Thermal radical initiator derivatives based on O-imino-isourea: Synthesis, polymerization, and characterization," J. Polym. Sci - Part A: Polym. Chem., 54, 3593-3600 (2016)

(**) M.S. Um, D.S. Ham, S.G. Cho, S.J. Lee, K.J. Kim, J.H. Lee, S.-H. Choa, H.W. Jung, W.J. Choi, "Surface mechanical properties of poly(urethane acrylate)/silica hybrid interpenetrating polymer network (IPN) coatings," Prog. Org. Coat., 97, 166-174 (2016).

(**) H.S. Ji, W.-G. Ahn, I. Kwon, J. Nam, H.W. Jung, "Operability coating window of dual-layer slot coating process using viscocapillary model," Chem. Eng. Sci., 143, 122-129 (2016).

(**) I. Kwon, M.-S. Chun, H.W. Jung, J.C. Hyun, "Determination of draw resonance onsets in tension-controlled viscoelastic spinning process using transient frequency response method," J. Non-Newtonian Fluid Mech., 228, 31-37 (2016).

(**) G. Jin, W.-G. Ahn, S.J. Kim, J. Nam, H.W. Jung, J.C. Hyun, "Effect of shim configuration on internal die flows for non-Newtonian coating liquids in slot coating process," Korea-Australia Rheol. J., 28(2), 159-164 (2016)

 

(2012-2015)

(**) W.-G. Ahn, S. H. Lee, J. Nam, H.W. Jung, "Effect of flow rate variation on the frequency response in slot coating with upstream sloped die geometry," Korean J. Chem. Eng., 37(7), 1218-1221 (2015). 

(**) J.W. Hwang, S.M. Noh, B. Kim, H.W. Jung, "Gelation and crosslinking characteristics of photo-polymerized poly(ethylene glycol) hydrogels," J. Appl. Polym. Sci., 132, 41939 (2015).

(**) S.M. Noh, J.H. Nam, J. Oh, H.W. Jung, "Scratch and recovery characteristics of automotive clearcoats containing blocked polyisocyanate crosslinkers," J. Coat. Technol. Res., 12(1), 85-95 (2015).

(**) J.W. Hwang, K.N. Kim, S.M. Noh, H.W. Jung, "The effect of thermal radical initiator derived from O-imino-isourea on thermal curing characteristics and properties of automotive clearcoats," J. Coat. Technol. Res., 12(1), 177-186 (2015).

(**)S.Y. An*, D.G. Lee*, Lee, J.W. Hwang, K.N. Kim, J.H. Nam, S.M. Noh, H.W. Jung, J. Oh, "Photo-induced thiol-ene polysulfide-crosslinked materials with tunable thermal and mechanical properties," J. Polym. Sci. Part A, 52(21), 3060-3068 (2014).

(**) S. Shin, J.M. Lee, J.W. Hwang, H.W. Jung, N.S. Nho, K.B. Lee, "Physical and rheological properties of deasphalted oil produced from solvent deasphalting," Chem. Eng. J., 257, 242-247 (2014).

(**) J.Y. Lee, M.S. Yi, H.C. Jeong, J.T. Kim, J.H. Nam, S.M. Noh, H.W. Jung, "Characterization of clearcoats containing phosphoric acid-functionalized acrylic polyols for automotive pre-coated metal sheet coatings," J. Coat. Technol. Res., 11, 697-710 (2014).

(**) J. Choi, J.-W. Choi, D.J. Suh, J.-M. Ha, J. W. Hwang, H.W. Jung, K.Y. Lee, H-C Woo, “Production of brown algae pyrolysis oils for liquid biofuels depending on the chemical pretreatment methods,” Energy Conversion and Management, 86, 371-378 (2014). 

(**) S. Park, J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. Noh, H.W. Jung, "Rheology and curing characteristics of dual-curable clearcoats with hydroxyl functionalized urethane methacrylate oligomer: Effect of blocked isocyanate thermal crosslinkers," Korea-Australia Rheology J., 26, 159-167 (2014).

(**) N. Chan, H.W. Jung, S.M. Noh, J. Oh, "Functional amphiphilic oligo(ethylene oxide) methacrylate based block copolymers: synthesis by ARGET ATRP and aqueous mecellization," Polym. Int., 63, 858-867 (2014).

(**) S.H. Lee, S.J. Kim, J. Nam, H.W. Jung, J.C. Hyun, "Effect of sloped die lip geometry on the operability window in slot coating flows using viscocapillary and two-dimensional models," Journal of Coatings Technology and Research, 11(1), 47-55 (2014).

(**) G.H. Han*, S.H. Lee*, W-G Ahn, J. Nam, H.W. Jung, "Effect of shim configuration on flow dynamics and operability windows in stripe slot coating process," Journal of Coatings Technology and Research, 11(1), 19-29 (2014).

(**) S.Y. An, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J. Oh, "Multifunctional linear methacrylate copolymer polyenes having pendant vinyl groups: synthesis and photo-induced thiol-ene crosslinking polyaddition," J. Polym. Sci.-Polym. Chem., 52, 572-581 (2014).

(**) J.Y. Lee, J.M. Sung, K. Yoon, M.-S. Chun, H.W. Jung, "Debye screening effect on scaling behavior of longest relaxation time of biological polyelectrolyte chain," Bull. Korean Chem. Soc., 34, 3703-3708 (2013).

(**) Q. Zhang, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J.K. Oh, "New photo-induced thiol-ene crosslinked films based on linear methacrylate copolymer polythiols," J. Polym. Sci. Part A: Polym. Chem., 51, 2860-2868 (2013).

(**) J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. Noh, H.W. Jung, "Rheology and curing characteristics of dual-curable automotive clearcoats using thermal radical initiator derived from O-imino-isourea and photo-initiator," Prog. Org. Coat., 76, 1666-1673 (2013).

(**) I.J. Lee, S. Park, S.M. Noh, H.W. Jung, J.M. Park, "Rheology and roll coating dynamics of metallic basecoats for automotive pre-coated metal sheet," Prog. Org. Coat., 76, 917-923 (2013).

(**) J.Y. Lee*, J.W. Hwang*, H.W. Jung, S.H. Kim, S.J. Lee, K. Yoon, D. Weitz, "Fast dynamics and relaxation of colloidal drops during the drying process using multi-speckle diffusing wave spectroscopy," Langmuir, 29(3), 861-866 (2013).

(**) J.Y. Lee, H.W. Jung, J.C. Hyun, "Rotational relaxation time of polyelectrolyte xanthan chain using single molecule tracking method" Korea-Australia Rheology Journal, 24, 333-337 (2012).

(**) Q. Ziang, S.M. Noh, J.H. Nam, H.W. Jung, J.M. Park, J.K. Oh, "Dual temperature and thiol-responsive POEOMA-multisegmented polydisulfides: Synthesis and thermoresponsive properties," Macromol. Rapid Comm., 33, 1528-1534 (2012).

(**) J.Y. Lee, M.-S. Chun, H.W. Jung, J.C. Hyun, “Conformational dynamics of sub-micron sized wormlike polyelectrolyte polymer in flow fields,” Macromolecular Research, 20, 1163-1172 (2012).

(**) H. Son, H. Jin, S.R. Choi, H.W. Jung, S. Park, "IR probing of ion pairing equilibrium and dynamics of metal-selenocyanate ion pairs in N,N-dimethylformamide solutions," J. Phys. Chem. B, 116, 9152-9159 (2012).

(**) Y. Kim, D. Kim, I. Kwon, H.W. Jung, J. Cho, “Solvent-free inorganic nanoparticle fluids with highly conductive or fluorescent properties allowing layer-by-layer assembly,” J. Materials Chemistry, 22, 11488-11493 (2012).

(**) H. Koh*, I. Kwon*, H.W. Jung, J.C. Hyun, “Operability window of slot coating using viscocapillary model for Carreau-type coating liquids,” Korea-Australia Rheology J., 24, 135-139 (2012).

(**) S.M. Noh, J. Min, J.W. Lee, H.W. Jung, and J.M. Park, “The application of dual-function microgels in UV/thermal dual-cure clear coats,” J. Appl. Polym. Sci., 126, E493-E500 (2012).

(**) J. Nam, H. Lim, D. Kim, H.W. Jung, and S. Shin, “Continuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid,” Lab on a Chip, 12, 1347-1354 (2012).

(**) H.M. Kim, J.S. Lee, H.W. Jung, and J.C. Hyun, “Frequency response analysis of non-isothermal film blowing process using transient simulation,” J. Appl. Polym. Sci., 123(5) 3028-3035 (2012).

(**) S.M. Noh, J.W. Lee, J.H. Nam, J.M. Park, H.W. Jung, “Analysis of scratch characteristics of automotive clearcoats using carwash and nano-scratch tests,” Progress in Organic Coatings, 74, 192-203 (2012).

(**) S.M. Noh, J.W. Lee, J.H. Nam, K.H. Byun, J.M. Park, H.W. Jung, “Dual-curing behavior and scratch characteristics of hydroxyl functionalized urethane methacrylate oligomer for automotive clearcoats,” Progress in Organic Coatings, 74, 257-269 (2012).

 

(2006-2011)

(**) J.H. Kim, I.J. Lee, S.M. Noh, C.Y. Kang, J.H. Nam, H.W. Jung, J.M. Park, “Dynamics and instability of a polymeric paint in roll coating

process for automotive pre-coating application,” Polymer (Korea), 35(6), 574-579 (2011).

(**) S.H. Lee, S.I. Youn, J.S. Lee, H.W. Jung, J.C. Hyun, “Effect of air pressure difference on the stability and sensitivity in simplified curtain drawing flow,” J. Chem. Eng. Japan, 44, 524-528 (2011).

(**) I.Y. Kwon, H.W. Jung, and J.C. Hyun, “Application of continuation method for tracking steady-state contours in viscoelastic film blowing,” Korea-Australia Rheology J., 23, 113-117 (2011).

(**) H.W. Jung, J.S. Lee, “Nonlinear dynamics and chaotic motion in the isothermal film casting process,” Korea-Australia Rheol. J., 23, 59-65 (2011).

(**) S.H. Lee, H.J. Koh, B.K. Ryu, S.J. Kim, H.W. Jung, J.C. Hyun, “Operability coating windows and frequency response in slot coating flows using a viscocapillary model,” Chem. Eng. Sci., 66, 4953-4959 (2011).

(**) J.Y. Lee, H.W. Jung, J.C. Hyun, M-S Chun, “Lateral displacement of DNA molecule in abrupt 90^o microbends,” J. Korean Physical Society, 58, 125-131 (2011).

(**) D. Jo, J. Jeon, J.W. Hwang, J.Y. Lee, H.W. Jung, S.H. Kim, “Optimization of physical parameters of solid oxide fuel cell electrode using electrochemical model,” Korean J. Chem. Eng., 28, 1844-1850 (2011).

(**) J.W. Hwang, J.Y. Lee, D.H. Cho, H.W. Jung, S.H. Kim, "Polarization Characteristics and Fuel Utilization in Anode-supported Solid Oxide Fuel Cell Using Three-dimensional Simulation," Korean J. Chem. Eng., 28, 143-148 (2011).

(**) A.R. Cho, D.M. Shin, H.W. Jung, J.C. Hyun, J.S. Lee, D. Cho, and Y.L. Joo, “Effect of annealing on the crystallization and properties of electrospun PLA and nylon 6 fibers,” J. Appl. Polym. Sci., 120, 752-758 (2011).

(**) J.S. Lee, H.W. Jung, and J.C. Hyun, “Nonlinear dynamic behavior of nonisothermal film blowing process under the condition of constant bubble pressure,” AIChE J., 57(12), 3565-3570 (2011).

(**) J.S. Lee, H.W. Jung, and J.C. Hyun, “Transient solutions of nonlinear dynamics in film blowing accompanied by on-line crystallization,” J. Rheol., 55, 257-271 (2011).

(**) J.H. Lee, S.K. Han, J.S. Lee, H.W. Jung, and J.C. Hyun, “Ribbing instability in rigid and deformable forward roll coating flows,” Korea-Australia Rheol. J., 22, 75-80 (2010).

(**) H.H. Lee, Y.S. Song, J.Y. Lee, H.W. Jung, and S.W. Kim, “Rheological properties of culture broth of Acremonium chrysogenum M35 in baffled flasks with glass beads,” Korea-Australia Rheol. J., 22, 52-58 (2010).

(**) J.H. Yun, M-S Chun, and H.W. Jung, “The geometry effect on steady electrokinetic flows in curved rectangular microchannels,” Phys. Fluids, 22, 052004 (2010).

(**) H.Y. Park, J.W. Hwang, K.T. Park, S. Kim, Y.U. Jeong, H.W. Jung, and S.H. Kim, “Effect of process conditions on dynamics and performance of PEMFC: Comparison with experiments,” Thin Solid Films, 518(22), 6505-6509 (2010).

(**) J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Sensitivity of spinning process with flow-induced crystallization kinetics using frequency response method,” Korean J. Chem. Eng., 27(1), 37-44 (2010).

(**) S.K. Han, D.M. Shin, H.Y. Park, H.W. Jung, J.C. Hyun, “Effect of viscoelasticity on dynamics and stability in roll coatings,” European Physical Journal-Special Topics, 166, 107 (2009).

(**) S.W. Choi, D.M. Shin, J.S. Lee, J. M. Kim, H.W. Jung, J.C. Hyun, “Transient response of two-dimensional viscoelastic film casting processes to sinusoidal disturbances,” Korean J. of Chem. Eng., 26, 26 (2009).

(**) J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Direct calculation of limit cycles of draw resonance and their stability in spinning process,” J. Society of Rheology, Japan, 36(3), 132-136 (2008).

(**) J.Y. Lee, B.K. Ryu, J.S. Lee, H.W. Jung, J.C. Hyun, “Conformation of single DNA molecule in a slot coating flow,” Korea-Australia Rheology J., 20(2), 89-94 (2008).

(**) J.S. Lee, D.M. Shin, H.W. Jung, J.C. Hyun, “Transient solutions of dynamics in fiber spinning and film casting accompanied by flow-induced crystallization,” J. Central South University of Tech., 14, 393-396 (2007).

(**) J.S. Lee, D.M. Shin, H.W. Jung, J.C. Hyun, “Stability analysis of a three-layer film casting process,” Korea-Australia Rheology J., 19(1), 27-33 (2007).

(**) D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Multiplicity, bifurcation, stability and hysteresis in dynamic solutions of film blowing process,” J. Rheology, 51, 605-621 (2007).

(**) D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Transient and steady-state solutions of 2-D viscoelastic non-isothermal simulation model of film casting process via finite element method,” J. Rheology, 51, 393-407 (2007).

(**) H.W. Jung, Y.U. Jeong, “Electrochemical properties of various transition metal compounds for energy storage,” Studies in Surface Science and Catalysis, 159, 633-636 (2006). 

(**) J.S. Lee, D.M. Shin, H.-S. Song, H.W. Jung, J.C. Hyun, “Existence of optimal cooling conditions in the film blowing process,” 137, 24-30, J. Non-Newtonian Fluid Mech. (2006).

(**) D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “High-speed fiber spinning process with spinline flow-induced crystallization and neck-like deformation,” Rheologica Acta, 45, 575-582 (2006).

(**) S.I. Youn, S.Y. Kim, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “A review on viscocapillary models of pre-metered coating flows,” Korea-Australia Rheology J., 18(4), 209-215 (2006). 

 

(2002-2005)

(**) J.S. Lee, H.W. Jung, J.C. Hyun, L. E. Scriven, “A simple indicator of draw resonance instability in melt spinning processes,” AIChE J., 51(10), 2869-2874 (2005).

(**) J. S. Lee, D. M. Shin, H. W. Jung, J. C. Hyun, and Y. U. Jeong, “Frequency Response Method to Determine the Stability of the Viscoelastic Spinning Processes,” J. Society of Rheology, Japan, 33(4), 215-218 (2005).

(**) D. M. Shin, J. S. Lee, H. W. Jung, and J. C. Hyun, “Analysis of the Effect of flow-induced crystallization on the stability of low-speed spinning using the linear stability method,” Korea-Australia Rheology J., 17(2), 63-69 (2005).

(**) J. S. Lee, D. M. Shin, H. W. Jung, and J. C. Hyun, “Transient Solutions of the Dynamics in Fiber Spinning Process Accompanied by Flow-induced Crystallization,” J. Non-Newtonian Fluid Mech., 130, 110-116 (2005).

(**) J. M. Kim, J. S. Lee, H. W. Jung, and J. C. Hyun, “Transient Solutions of the Dynamics of Film Casting Process Using a 2-D Viscoelastic Model”, J. Non-Newtonian Fluid Mech., 132, 53-60 (2005).

(**) J. S. Lee, H. W. Jung, and J. C. Hyun, “Stabilization of Film Casting by an Encapsulation Extrusion Method,” J. Non-Newtonian Fluid Mech., 117, 109 (2004).

(**) J. C. Hyun, H. Kim, J. S. Lee, H.-S. Song, and H. W. Jung, “Transient Solutions of the Film Blowing Dynamics,” J. Non-Newtonian Fluid Mech., 121, 157-162 (2004).

(**) H. W. Jung, J. S. Lee, J. C. Hyun, S. J. Kim, and L. E. Scriven, “Simplified Modeling of Slide-fed Curtain Coating Flow,” Korea-Australia Rheology J., 16, 227-233 (2004).

(**) H. W. Jung, J. S. Lee, L. E. Scriven, and J. C. Hyun, “The Sensitivity and Stability of Spinning Process Using Frequency Response Method,” Korean J. of Chem. Eng., 21(1), 20-26 (2004).

(**) J. S. Lee, H. W. Jung, and J. C. Hyun,  ”Frequency Response of Film Casting Process,“ Korea-Australia Rheology J., 15(2), 91-96 (2003). 

 

(- 2002)

(**) H.W. Jung, J. S. Lee, and J. C. Hyun, “Sensitivity analysis of melt spinning process by frequency response,” Korea-Australia Rheology Journal, 14 (2), 57-62 (2002). 

(**) H.W. Jung, D. Won, and C. Kim, “Hydrodynamic Interaction between Two Cylinders in Planar Shear Flow of Viscoelastic Fluid,” Korea-Australia Rheology Journal, 14(4), 203-207 (2002).  

(**) J.S. Lee, H. W. Jung, H.-S. Song, K.-Y. Lee, and J. C. Hyun, “Kinematic Waves and Draw Resonance in Film Casting Process,” J. Non-Newtonian Fluid Mech., 101, 43 (2001).

(**) Lee, J.S., H.W. Jung, S. H. Kim, and J. C. Hyun, “Effect of Fluid Viscoelasticity on the Draw Resonance Dynamics of Melt Spinning,” J. Non-Newtonian Fluid Mech., 99, 159-166 (2001).  

(**) H. W. Jung, H.-S. Song, and J. C. Hyun, “Draw Resonance and Kinematic Waves in Viscoelastic Isothermal Spinning,” AIChE J., 46 (10), 2106 (2000).

(**) J. S. Lee, H. W. Jung, and J. C. Hyun, “Melt Spinning Dynamics of Phan-Thien Tanner Fluids,” Korea-Australia Rheology Journal, 12 (2), 119 (2000).

(**) H. W. Jung, S. M. Choi, and J. C. Hyun, “Approximate Method for Determining the Stability of Film Casting Process,” AIChE J., 45, 1157 (1999).

(**) H. W. Jung, H.-S. Song, and J. C. Hyun, “Analysis of the Stabilizing Effect of Spinline Cooling in Melt Spinning,” J. Non-Newtonian Fluid Mech., 87, 165 (1999).

(**) H. W. Jung and J. C. Hyun, “Stability of Isothermal Spinning of Viscoelastic Fluids,” Korean J. of Chem. Eng., 16, 325 (1999).

(**) H.S. Lee, W. H. Jung, H. W. Jung, W. N. Kim, and J. C. Hyun, “Properties of Blends of Polycarbonate and a Thermotropic Liquid Crystalline Polymer,” Polymer (Korea), 20, 813 (1996).  

 

Domestic Papers

(**) H.W. Jung, B.J. Jeong, W. N. Kim, J.C. Hyun, “A rheological/Morphological study on the blends of thermotropic liquid crystalline polymers and thermoplastic polymers,” Korean J. of Rheology, 8, 92 (1996).

(**) H.W. Jung, J.S. Lee, W.N. Kim, J.C. Hyun, “A Study on Rheological Properties of Polypropylene/Polycarbonate Blends,”Korean J. of Rheology, 8, 119 (1996).

(**) H.W. Jung, K. Cho, and J.C. Hyun, “The Effect of Extensional Flow on the Morphology of Polyblends Containing a Liquid Crystalline Polymer,” Korean J. of Rheology, 9, 111 (1997).

(**) H.W. Jung, J. S. Lee, and J. C. Hyun, “Frequency Response for Stability and Sensitivity Analyses in Viscoelastic Spinning Process,” Transport Phenomena, 17, 29 (2003).

(**) 정현욱, “코팅 공정 기술,” NICE, 22, 32 (2004).

(**) 김수연, 정현욱, “Slot 코팅 공정,” NICE, 23(5), 524-529 (2005).

(**) 조두환, 이재륭, 김학율, 정현욱, “Roll코팅 공정에서 수지 부착량 제어 모델 연구,” POSCO 연구논문, 11(1) 128-137 (2006).

(**) J.Y. Kim, H. Lee, H.S. Kim, H.W. Jung, D.K. Choi, “Facilitated Transport Membrane for Ethylene/Ethane and Propylene/Propane Separation,” Clean Technology, 13(1), 79-84 (2007).

(**) J.W. Hwang, J.Y. Lee, D.H. Jo, H.W. Jung, S.H. Kim, “Effect of Interconnect Structure on the Cell Performance in Anode-supported Tubular SOFC Using Three-dimensional Simulation,” Clean Technology, 16, 297-303 (2010).

(**) S.H. Lee, H.J. Koh, S.H. Shim, H.W. Jung, J.C. Hyun, “An optimal die design for the coating uniformity of Non-Newtonian liquids in slot coating process,” Korean Chemical Engineering Research, 49(3), 314-319 (2011).

(**) C.Y. Kang, J.Y. Lee, S.M. Noh, J.H. Nam, J.M. Park, H.W. Jung, S.S. Yu, “Study for synthesis and properties of polyurethane based on polyester polyol with varying hydroxyl values for automotive pre-painted metal sheet applications,” J. Adhesion and Interface, 12, 34-42 (2011).

(**) 정현욱, “환경친화적 자동차 선도장 강판 제조 및 모듈화 기술 개발,” NICE, 30, 678 (2012).

(**) 이동근, 황지원, 김경남, 노승만, 정현욱, “자동차 선도장 강판용 베이스코트의 유변학적 특성 및 롤코팅 동적 거동,” 접착 및 계면, 16(1), 15-21 (2015). 

(**) 이관영, 이기봉, 정현욱, 최정규, 이대원, “초저에너지-초저배출 자동차 기술 개발: 2그룹: 다기능 촉매/흡착제 일체형 필터 개발,” NICE, 35(4), 409-413 (2017).

 

Patents:

(**) 현재천, 정현욱, 송현섭, 김현철, 이주성, 신동명, “휠름 블로잉 공정의 동적 모사와 과도해 계산 도출 방법” 대한민국 특허등록 (10-0701303-0000) (2007).

(**) Hyun, J.C., H. W. Jung, H.-S. Song, H. Kim, J.S. Lee, D. M. Shin, “A method for solving transient solution and dynamics in film blowing process,” PCT, PCT/KR2005/000431 (2005). US 2007/0179765 (2007)

(**) 정현욱, 현재천, 이주성, 신동명, 윤장호, “고분자 공정에서 발생하는 연신공명 불안정성 분석 방법 및 이를 기록한 기록매체, 대한민국 특허출원(10-2007-0106344) (2007)

(**) 정현욱, 현재천, 이주성, 신동명, 윤장호, “고분자 공정에서 발생하는 연신공명 불안정성 분석 방법 및 이를 기록한 기록매체, 대한민국 특허 등록(10-0907087) (2009)

(**) 정현욱, 현재천, 신동명, 최승원, 이주성, “고분자 휠름 가공 공정의 민감도 분석,” 대한민국 특허등록 (10-1068072) (2011)

(**) 정현욱, 현재천, 황지원, 이정용, “고분자 전해질막 연료전지용 전극-막 접합체의 균일코팅을 위한 슬롯 코팅 다이 내부 설계방법 및 슬롯 코팅 다이 장치 (Design method of internal die structure and slit coating die apparatus for uniform coating of MEA in PEMFC),” 대한민국 특허등록 (10-1201937) (2012)

(**) 권승범, 함형택, 채성석, 오세원, 정현욱, “탄성 및 가공성이 우수한 에틸렌공중합체” 대한민국 특허등록 (10-2012-00068383) (2013).

(**) “Ethylene copolymer with improved elasticity and processibility,” US 출원번호 13/182.121. (2011.7월 13일), Taiwan 100124921 (2011), PCT KR2011/005227 (2011).

(**) S.M. Noh, J.-W. Lee, J.H. Nam, H.W. Jung, “Highly scratch resistant one-part clear coating composition comprising silane-modified blocked isocyanate for cars,” US 13/335,800  (2011), Japan 특허 (2011-2803002) (2011).

(**) 박백성, 정현욱, "유변 특성 측정 장치 및 이를 이용한 컬러필터 내 미세패턴 형성공정 (Rheological Properties Measuring Device and Process for Forming for Micro Pattern in Color Filter Using the Same) (대한민국 특허출원 2015-0041762)

(**) 박성준, 이정현, 정현욱, 안원기, 최완석, 이용우, "듀얼(이중층)-슬롯코팅 기술을 이용한 복합 분리막의 단일 제조공정 (One-step fabrication of thin film composite membrane using a dual-layer slot coating)," 대한민국 특허출원 10-2015-0190720 (2015)

(**) 안원기, 김광림, 정현욱, "비뉴튼성 코팅액의 균일 분포를 위한 슬롯 다이 내의 심 및 이를 포함하는 슬롯 다이 코터 (Shim for the uniform coating distribution of non-Newtonian coating liquids in side slot die and slot die coater including the same)," 대한민국 특허등록 10-1841346 (2018)

(**) 정현욱, 이관영, 안원기, 박백성, "점착력 및 탄성율이 다른 점착층을 포함하는 필름 및 이의 제조 방법," 특허등록 10-1806730 (2017).

(**) 정현욱, 권일영, 이창훈, 안원기, 이관영, “공압출 공법을 이용한 생분해성 고분자 박막 제조 방법,” 대한민국 특허출원 10-2016-0176818 (2016).

(**) 정현욱, 전병진, 이관영, 박진석, 이기욱, 안원기, “코팅 비드 영역이 개선된 슬롯 코팅 장치,” 대한민국 특허출원 10-2017-0158882 (2017).

(**) 이정현, 정현욱, 최완석, 신민규, 이종석, 원영준, 이다혜, “내오염 특화 패턴 구조를 가지는 박막 복합체 분리막의 제조 공정,” 대한민국 특허출원 10-2017-0111761 (2017). 

 

Essays and Writings:

(**) 정현욱, 신간서적안내 “Polymer Processing Instabilities: Control and Understanding,” NICE, 23(2), 186 (2005).

(**) 정현욱, 학회참관기, 제3차 유럽 유변학술회의, NICE, 24(4), 402 (2006).

(**) 정현욱, “화학공학없는 IT산업은 없다,” 시사저널 제 917호 (2007년 5월 22일). 

(**) 정현욱, “2016년도 봄 총회 및 학술대회를 마치며,” NICE, 34(3), 296 (2016).

 

 

Research Topic

 

내용을 입력해주세요.

 

Current Members 

Research Professor:

Dr. Byoungjin Chun 

 

PhD Candidates:

Jung Mun Sung / Younggun June / Dae Geun Oh / Kyu Yoon / Dong Geun Lee / Changhoon Lee /

Kevin Injoe Jung / Jin Seok Park / Gi Wook Lee

 

MS Candidates: 

Nahee Kim / Tae Hyung Yoo / So Hyun Kim / Jinsil Kim

 

Alumni

Research Professor:

Prof. Gil Sun Lee (Kookmin Univ.) 

 

PhD:

Dong Myeong Shin (2009, Samsung SDI) co-advised by Profs. J.C. Hyun and H.W. Jung 

Jeong Yong Lee (2013, LG Chem)

Seung Man Noh (2013, Korea Research Institute of Chemical Technology) 

Si Hyung Lee (2013, Samsung Advanced Institute of Technology) 

Ji Won Hwang (2015, LG Chem)

Ilyoung Kwon (2017, LG Hausys)

Won-Gi Ahn (2018, Samsung SDI)

Baek Sung Park (2018, Samsung SDI)

 

MS:

Wonsoon Park (2006, PhD at Univerity of Tokyo 2014, Samsung Electronics)

Su Yeon Kim (2006, GS E&C) 

Suk Il Yoon (2007, LG Chem) 

Ji Yeon Kim (2007) 

Hak Yul Kim (2007, Miwon Commercial Co.) 

Jang Ho Yun (2008, PhD at Univ of Delaware 2014, Hanwha Total)

Sang Kwon Han (2008, LG Electronics) 

Seo Hoon Shim (2008, Lotte Chemical)

Hye Yeong Park (2009, PhD at Purdue Univ 2014, Samsung Electronics) 

Bo Kyung Ryu (2009, Samsung SDI)

Seung Won Choi (2009, PhD at Georgia Tech, LG Chem) 

Ah Ra Cho (2010, Hanwha Chemical) 

Je Hoon Lee (2010, PhD at Akron Univ 2017, LG Chem) 

Hyung Min Kim (2011, SK Innovation) 

Hyun Jung Koh (2012, Samsung SDI)

Jin Ho Kim (2012, Lotte Chemical) 

In Jun Lee (2013, Hanwha Chemical) 

Guihua Han (2013, In China)

Samuel Park (2014, Jikyung Chemical) 

Gwi Jeong Oh (2015, Samsung SDI)

Ho Suk Ji (2015, S-Oil)

Guang Lin Jin (2016) 

Min Sup Um (2016, KRICT) 

Yong Woo Lee (2017, LG Chem) 

Da Young Lee (2018, Samsung Electronics)